13
Firewall Settings
Firewall settings are intended for advanced users and network administrators.
There is usually no need to apply any settings in a home environment.
Note:
You can set up to a maximum of 10 filter items for
MAC/IP/Port
Filtering
and
Port Forwarding
.
MAC / IP / Port filtering
Default Policy
: Set how to handle the packet if none of the rules match.
MAC address
: Set the MAC address to be filtered.
Destination IP Address
: Set the destination IP address to be filtered.
Source IP Address
: Set the source IP address to be filtered.
Protocol
: Set which protocol to be used for filtering.
Destination Port Range
: Set the destination port numbers to be filtered
Source Port Range
: Set the source port numbers to be filtered.
Action
: Set how to handle the detected packet.
Note
：
：
：
：
Filtering rules are matched one by one, if a provision is met it will not
continue to match against the other rules set.
Port Forwarding Settings
You can set up virtual servers to provide internet services. Select
Firewall >
Port Forwarding > Enable
to configure the Virtual Server Settings.
IP Address
: Set the IP address for the virtual server.
Port Range
: Set the port numbers for the virtual server.
Protocol
: Set the protocol for the virtual server.
