background image

  ZTE MF70 Getting Started

 

 

Confidential and Proprietary Information of ZTE CORPORATION 11 

 

 

below the maximum value. This is because the device is designed to operate at multiple power 
levels so as to use only the poser required to reach the network. In general, the closer you are to a 
wireless base station antenna, the lower the power output. SAR compliance has been established 
in the host product(s) (laptop computers), tested at 5mm separation distance to the human body, 
and tested with USB slot configurations including Horizontal-UP, Horizontal-Down, 
Vertical-Front, Vertical-Back. This device can be used in host product(s) with substantially 
similar physical dimensions, construction, and electrical and RF characteristics. The highest SAR 
value, tested per FCC RF exposure guidelines for USB dongle, as described in this user guide, is 
1.15 W/kg. The FCC has granted an Equipment Authorization for this device with all reported 
SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information 
on this device is on file with the FCC and can be found under the Display Grant section of 
www.fcc.gov/oet/ea/fccid after searching on FCC ID: Q78-ZTEMF70. 
 

 

Summary of Contents for MF70












Reviews: