background image

MF985U User Manual

 

be damaged. 

• No  dismantling  by  non-professionals  and  only  qualified  technicians  can  undertake 

repair work. 

• Operating  temperature  range  of  0

recommended. 

• Do not connect the charger

trigger the protection mechanism
you want to charge the battery, please reconnect the charger.

• Do not connect the charge

and  battery  in  non-operating  temperature.  Failing  to  do  so  will  shorten  battery  life  or 
cause  battery  swelling  or  leakage.  If  the  battery  shows  signs  of  swelling  or  leakage, 
please stop use immediately.

 

Using Battery 

 Do not short-circuit the battery, as this can cause excessive heat and fire.

• Do not store battery in hot areas or dispose of it in a fire to avoid explosion.

• Do not disassemble or modify the battery.

• When not using the battery for a long period, remove it from your device and store it in a 

cool dry place. 

• Never use any charger or battery damaged or worn out.

• Return the wear-out battery to the provider or put it in the appointed recycle place. Do 

not put it in familial rubbish.

  WARNING! 

If  the  battery  is  broken,  keep  away  from  it.  If  it  taints  your  skin,  wash  your  skin  with 
abundant fresh water and ask doctor 

Limited Warranty 

 This warranty does not apply to defects or errors in the Product caused by:

i. Reasonable abrasion. 

ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions 

or procedures. 

iii. End User’s mishandling, misuse, negligence, or improper 

storage, servicing or operation of the Product.

iv. Modifications or repairs not made by ZTE or a ZTE

Confidential and Proprietary Information of ZTE CORPORATION 

professionals  and  only  qualified  technicians  can  undertake 

Operating  temperature  range  of  0

  ~  +35

  and  humidity  range  of  5%  ~  95%  are 

charger while using the device for a long period

mechanism of the battery, and the battery will not be charged. 

you want to charge the battery, please reconnect the charger. 

charger while using the device for a long period or use the device 

operating  temperature.  Failing  to  do  so  will  shorten  battery  life  or 

cause  battery  swelling  or  leakage.  If  the  battery  shows  signs  of  swelling  or  leakage, 

immediately. 

circuit the battery, as this can cause excessive heat and fire.

Do not store battery in hot areas or dispose of it in a fire to avoid explosion.

Do not disassemble or modify the battery. 

sing the battery for a long period, remove it from your device and store it in a 

Never use any charger or battery damaged or worn out. 

out battery to the provider or put it in the appointed recycle place. Do 

in familial rubbish. 

If  the  battery  is  broken,  keep  away  from  it.  If  it  taints  your  skin,  wash  your  skin  with 
abundant fresh water and ask doctor for help if necessary. 

apply to defects or errors in the Product caused by:

End User’s failure to follow ZTE’s installation, operation or maintenance instructions 

End User’s mishandling, misuse, negligence, or improper installation, disassembly, 

storage, servicing or operation of the Product. 

Modifications or repairs not made by ZTE or a ZTE-certified individual.

 

Confidential and Proprietary Information of ZTE CORPORATION 37

professionals  and  only  qualified  technicians  can  undertake 

and  humidity  range  of  5%  ~  95%  are 

a long period. Failing to do so will 

of the battery, and the battery will not be charged. If 

the device for a long period or use the device 

operating  temperature.  Failing  to  do  so  will  shorten  battery  life  or 

cause  battery  swelling  or  leakage.  If  the  battery  shows  signs  of  swelling  or  leakage, 

circuit the battery, as this can cause excessive heat and fire. 

Do not store battery in hot areas or dispose of it in a fire to avoid explosion. 

sing the battery for a long period, remove it from your device and store it in a 

out battery to the provider or put it in the appointed recycle place. Do 

If  the  battery  is  broken,  keep  away  from  it.  If  it  taints  your  skin,  wash  your  skin  with 

apply to defects or errors in the Product caused by: 

End User’s failure to follow ZTE’s installation, operation or maintenance instructions 

installation, disassembly, 

certified individual. 

Summary of Contents for MF985U











































Reviews: