ZXUPS S60
ZXUPS S606/S610
6/S610 (V1.1) Installation
(V1.1) Installation Manual
Manual
22
22
Confidential and Proprietary Information o
Confidential and Proprietary Information of ZTE CORPORATION
f ZTE CORPORATION
Battery Cabinet Installation
Battery Cabinet Installation
For high capacity type of ZXUPS S606/S610, the battery cabinet
For high capacity type of ZXUPS S606/S610, the battery cabinet
should be installed, and cables between batteries inside battery
should be installed, and cables between batteries inside battery
cabinet should be connected.
cabinet should be connected.
Install the battery cabinet according to related instructions and
Install the battery cabinet according to related instructions and
requirements.
requirements.
Checkpoint:
Checkpoint:
Before connecting the battery cables in the UPS cabinet,
Before connecting the battery cables in the UPS cabinet,
check that the battery voltage meets the requirement of
check that the battery voltage meets the requirement of
UPS
UPS
rated batt
rated batt
ery voltage
ery voltage
of 240
of 240
VDC.
VDC.
The precautions for installing the battery cabinet are described as
The precautions for installing the battery cabinet are described as
follows:
follows:
1.
1.
Tools
Tools
Before installing battery, take measures to make tools in good
Before installing battery, take measures to make tools in good
insulation condition: For example, wrap metal part with
insulation condition: For example, wrap metal part with
insulating tape, to avoid short circuit and human injury.
insulating tape, to avoid short circuit and human injury.
2.
2.
Battery cable
Battery cable
i.
i.
The battery cable must comply with the related requirement
The battery cable must comply with the related requirement
to avoid damage of batteries.
to avoid damage of batteries.
ii.
ii.
Normally, the positive lead should be red and the negative
Normally, the positive lead should be red and the negative
one should be blue. If black cables are used, label the cables
one should be blue. If black cables are used, label the cables
clearly to avoid confusion.
clearly to avoid confusion.
3.
3.
Battery
Battery
Each battery pack consists of twenty 12 VDC batteries with the
Each battery pack consists of twenty 12 VDC batteries with the
same capacity, which are connected in series. Use batteries of
same capacity, which are connected in series. Use batteries of
the same type. Otherwise, battery performance will be degraded
the same type. Otherwise, battery performance will be degraded
and the battery life span will be shortened.
and the battery life span will be shortened.
After unpacking, use the multimeter to measure battery voltage.
After unpacking, use the multimeter to measure battery voltage.
The rated voltage of each battery is 12 VDC. If the voltage is
The rated voltage of each battery is 12 VDC. If the voltage is
less than 10 VDC or the shell of any battery is broken, it
less than 10 VDC or the shell of any battery is broken, it
