Get Started
2
Set Up Your Phone
You must first charge the battery to begin setting up your phone.
1. Charge your battery.
Note:
Your phone's battery is integrated into the phone and cannot be removed.
l
Plug the USB connector into the charging/micro-USB jack on the lower left side of your
phone.
l
Plug the AC adapter into an electrical outlet. Fully charging a battery may take up to three
hours.
Note:
Your phone’s battery should have enough charge for the phone to turn on and find a signal,
run the setup application, set up voicemail, and make a call. You should fully charge the battery as
soon as possible.
Note:
If your phone is brand new or has not been used for some time, you may not see any
indication that the phone is being charged at first. This is caused by over-drained battery and your
phone will return to normal after enough time of charging.
2. Press and hold the
Power
Button
to turn the phone on.
l
If your phone is activated, it will turn on, search for service, and begin the setup process.
l
If your phone is not yet activated, see
Activate Your Phone
for more information.
Note:
Do not press the
Volume Button
when turning the phone on. Otherwise, you may switch
the phone to Download Mode, Recovery Mode, or Factory Testing Mode. To switch back to normal,
press and hold the
Power Button
for about 15 seconds.
