background image

WF824 Getting Started

 

 

Confidential and Proprietary Information of ZTE CORPORATION                                                                                      9

 

 

Warning and Notice 

To the Owner 

 

Some  electronic  devices  are  susceptible  to  electromagnetic  interference  sent  by  your  device  if 

inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of 

your device before using if necessary. 

 

Operating your device may interfere with medical devices like hearing aids and pacemakers. Please 

always keep them more than 20 centimeters away from such medical devices when they are turned 

on. Turn your device off if necessary. Consult a physician or the manufacturer of the medical device 

before using your device. 

 

Be  aware  of  the  usage  limitation  when  using  your  device  at  places  such  as  oil  warehouses  or 

chemical factories, where there are explosive gases or explosive products being processed. Turn off 

your device if required. 

 

The use of electronic transmitting devices is forbidden in aircrafts, at petrol stations and in hospitals. 

Please observe and obey all warning signs and switch off your device in these conditions. 

 

Do  not  touch  the  inner  antenna  area  if  not  necessary.  Otherwise  it  will  affect  your  device’s 

performance. 

 

Store your device out of the reach of little children. Your device may cause injury if used as a toy. 

 

Do not touch the metallic parts of your device so as to avoid a burn, when your device is working. 

Using Your Device 

 

Please use original accessories or accessories that are authorized. Using any unauthorized accessories 

may  affect  your  device’s  performance,  and  violate  related  national  regulations  about  telecom 

terminals. 

 

Avoid  using  your  device  near  or  inside  metallic  structures  or  establishments  that  can  emit 

electromagnetic waves. Otherwise it may influence signal reception. 

 

Your device is not waterproof. Please keep it dry and store in a shady and cool place. 

 

Do not use your device immediately after a sudden temperature change. In such case, it will produce 

dew inside and outside your device, so don’t use it until it becomes dry. 

 

Handle your device carefully. Do not drop, bend or strike it. Otherwise your device will be damaged. 

 

No dismantling by non-professionals and only qualified technicians can undertake repair work. 

 

Operating temperature range of -40  ~ +60  and humidity range of 5% ~ 95% are recommended. 

Summary of Contents for WF824













Reviews: