background image

 

Confidential and Proprietary Information of ZTE CORPORATION 13

C h a p t e r 

  12

 

To the Owner 

„

 

Some electronic devices are susceptible to electromagnetic interference sent by phone if inadequately 
shielded. Use phone at least 20 cm or as far away as you can from TV sets, radio and other automated 
office equipment so as to avoid electromagnetic interference. 

„

 

Operating phone may interfere with medical devices like hearing aids and pacemakers, or other 
medical devices in hospital. Consult a physician or the manufacturer of the medical device before 
using phone. 

„

 

Be aware of the usage limitation when using phone at places such as oil warehouses, or chemical 
factories, where there are explosive gases or explosive products being processed, because even if your 
phone is in idle state, it still transmits radio frequency (RF) energy. Therefore, power off your phone 
if required. 

„

 

Keep out of the reach of small children. Phone may cause injury if used as a toy. 

„

 

Do not put other things on the terminal to avoid overlaying radiator. 

Phone Use 

„

 

Please use original accessories or accessories that are authorized by the manufacturer. Using any 
unauthorized accessories may affect your phone’s performance, and violate related national 
regulations about telecom terminals, or even endanger your body. 

„

 

As your phone can produce electromagnetic field, do not place it near magnetic items such as 
computer disks. 

„

 

Do not expose your phone to direct sunlight or store it in hot areas. High temperatures can shorten the 
life of electronic devices. 

„

 

Prevent liquid from leaking into your phone. 

„

 

Disconnect external power supply and do not use your phone during thunderstorm. 

„

 

Unplug the external power adapter or remove battery when your phone is not in use, esp. for a long 
period of time. 

„

 

It is highly recommended to charge the battery before initial use. The battery might have been 
discharged during storage and delivery. 

„

 

Do not unplug the connector of the data cable from phone, and not install or remove battery, when the 
power is on. 

„

 

Keep phone power on and in service area when make emergency call. Enter emergency call number in 
status of standby, and then press Call key to send. 

„

 

Do not attempt to disassemble the phone by yourself. Non-expert handling of the devices may damage 
them. 

Battery Use 

„

 

Do not short-circuit the battery, as this can cause excessive heat and fire. 

„

 

Do not store battery in hot areas or dispose of it in a fire to avoid explosion. 

„

 

Never use any charger or battery damaged or worn out. 

„

 

Return the wear-out battery to the provider or put it in the appointed recycle place. Do not put it in 
familial rubbish. 

Warning:

 If the battery is broken, keep away from substance inside. If it taints your skin, wash your skin 

with abundant fresh water and ask doctor for help if necessary. 

Safety and General Use in Vehicles

 

„

 

Before making or answering a call, you should pay attention to the local laws about using wireless 
mobile phones and take them into account in practical use. 

„

 

Safety airbag, brake, speed control system and oil eject system shouldn’t be affected by wireless 
transmitting. If you do meet problems above, contact your automobile provider. 

„

 

Power off your mobile phone when refueling your automobile, and so do the place where duplex 
wireless equipments are banned. Don’t put your phone together with flammable or explosive items, 
inner spark may cause fire. 

Cleaning and Maintenance 

„

 

The phone is non-waterproof, keep it dry and store in shaded and cool place. 

Summary of Contents for WP228+





















Reviews: