17
Before a phone model is available for sale to the public in the U.S. and Canada, it must be
tested and certified by the FCC that it does not exceed the limits established by each
government for safe exposure. The tests are performed in positions and locations (e.g., at the
ear and worn on the body) that conform to a uniform testing methodology determined by an
expert standards body and then reported to the FCC.
While there may be differences between the SAR levels of various phones and at various
positions, they all met the governmental requirements for safe exposure. Please note that
improvements to this product model could generate differences in the SAR value for later
products; in all cases, products are designed to be within the guidelines.
The highest SAR value for this ZTE WP650 model phone when tested for use on the
right cheek was 1.32 mW/g.
Troubleshooting
If your phone appears following phenomenon in the process of application, read
following relative information at first. If the problems still can not be solved, please
contact with the distributor or service provider.
Problem
Check Point
When switching on the phone, it
prompts “Enter PIN1”.
Input your PIN1 Code which offered
with SIM card together. If you have
changed PIN1 code, input the new
PIN1 Code.
When switching on the phone, it
prompts “Emergency only”.
Check whether valid SIM card is
inserted or not.
When switching on the phone, it
prompts “Enter phone code”.
Enter phone lock code you set
already to unlock the phone.
No ring tone prompt for a
incoming call.
Check volume setting of ring tone.
No display on screen when
disconnect external power
supply.
Check whether the battery has
electricity, or it is damaged; or power
on the phone again.
Press Call key, but no number is
sent.
Check whether you have set
Network Call Bar.
