ZXA10 F660 User Manual
l
The Ethernet cable between the device and your PC has been connected properly.
l
The driver of your network adapter has been installed properly.
l
The TCP/IP setting has been configured correctly on your PC.
If the ZXA10 F660 IP address is 192.168.1.1, the IP address of the computer must
be from 192.168.1.2 to 192.168.1.254. The subnet mask must be 255.255.255.0
and the default gateway must be 192.168.1.1.
2.3 Logging In to the Device
Short Description
Perform this procedure to log in to the device.
Prerequisites
The device is properly connected and the computer is correctly configured.
Context
To log in to the device, perform the following steps:
Steps
1.
Open the Internet Explorer. Enter
http://192.168.1.1
(default
IP
address of the
device) on the address bar and press
Enter
. The login dialog box is displayed, as
shown in
Figure 2-6
.
Figure 2-6 Login
2.
Enter the
Username
and
Password
(by default, both are
admin
). Click
Login
.
– End of Steps –
Result
Logging in to the device is successful.
2-6
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Summary of Contents for ZXA10 F660
Page 6: ...IV ...
