Chapter 4 Network Configuration
Parameter
Description
Connection Trigger
Dial-up connection mode:
l
Always On
l
On Demand
l
Manual
Idle Timeout
Idle time before the dial-up auto disconnection,
available only in On Demand mode
b. Configure the static mode.
Select
Static
for
Type
, as shown in
Figure 4-3
.
Figure 4-3 Static Mode Configuration
Table 4-2
lists the parameters for the static mode configuration.
Table 4-2 Static Mode Configuration
Parameter
Description
Type
Connection mode
Connection Name
Static connection name, automatically generated
by the system
Enable NAT
Whether to enable the NAT function
Service List
Service modes supported by the system:
l
TR069 service mode
Remote maintenance and management mode
l
Internet service mode
Broadband and
IPTV
service mode
l
VoIP
service mode
Voice service mode
4-3
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Summary of Contents for ZXA10 F660
Page 6: ...IV ...
