ZXA10 F660 User Manual
3.
Click
Add
to finish the configuration. Click
Modify
to modify the configuration. Click
Delete
to delete the configuration.
– End of Steps –
Result
DHCP binding is configured.
4.3.3 Configuring Specific Address Range
Short Description
Perform this procedure to configure the specific address range.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the special address range, perform the following steps:
Steps
1.
On the
Network
tab, select
Address Management
, and then select
Specific Address
Range
, as shown in
Figure 4-14
.
Figure 4-14 Specific Address Range
2.
Click
Modify
to modify the parameters, as shown in
Figure 4-15
.
4-16
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Summary of Contents for ZXA10 F660
Page 6: ...IV ...
