Chapter 6 Service Configuration
Context
The multicast
MAC
limit function can be configured only when the IGMP mode is
IGMP
Snooping
.
IGMP Proxy
does not support this function.
To configure multicast MAC limit, perform the following steps:
Steps
1.
On the
Application
tab, select
IGMP
, and then select
Multicast MAC Limit
, as shown
in
Figure 6-34
.
Figure 6-34 Multicast MAC Limit
2.
Click the
Modify
icon to configure the multicast MAC limit, as shown in
Figure 6-35
.
Figure 6-35 Multicast MAC Limit Configuration
Table 6-15
lists the parameters for the multicast MAC limit configuration.
6-33
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential
Summary of Contents for ZXA10 F660
Page 6: ...IV ...
