11-1
11 Hardware Installation Check
Summary
Describing the hardware installation check items
11.1 Checking Components in the Cabinet
Check if:
1. The RF cables between the modules are connected correctly and firmly.
2. The bolts of all modules are screwed down to ensure reliable connections
between the modules and the backplane.
3. The unused connectors are screwed with matching terminals.
4. The RF cables are not cross-connected or pulled too tight. Some margin is
reserved at the turning corner and the connectors are connected firmly.
11.2 Checking the Cabinet
Check if:
1. The installation position of the cabinet complies with the design requirement.
2. After the shelf is fixed, it is stable enough to resist earthquake of 7 in Richter
scale.
3. No part of the shelf is loose or damaged. The shelf is well painted and the
indications on the shelf are complete, correct and clear.
4. No metal scraps or useless wires are left in the cabinet.
5. All bolts are screwed down, and flat washers and spring washers are installed
without inversion.
