Confidential and Proprietary Information of ZTE CORPORATION 119
A p p e n d i x
E
CE STATEMENT
Before using this GSM Macro Base Transceiver Station, read this important
RF energy awareness and control information and operational instructions
to ensure compliance with the CE RF exposure guidelines.
The assessment of compliance boundary is performed by calculation in
accordance with EN50383:2002.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance will void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to the CE Rules. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
For OUTDOOR use, a
Directional
Antenna with a maximum gain of 11dBi is
authorized for use with this unit. Outside antennas must be positioned to
observe minimum separation of 4.2M (13.78 feet) for 900MHz unit and 3M
(9.84 feet) for 1800MHz unit from all users and bystanders. For the
protection of personnel working in the vicinity of outside
antennas, the
following guidelines for minimum distances between the human body and
the antenna must be observed.
The installation of an OUTDOOR antenna must be such that, under normal
conditions, all personnel cannot come within 4.2M (13.78 feet) for 900MHz
unit and 3M (9.84 feet) for 1800MHz unit from the outside antenna.
Exceeding this minimum separation will ensure that the worker or
bystander does not receive RF-exposure beyond the Maximum Permissible
Exposure according to section
EN50383:2002
limits for Controlled
Exposure.
Summary of Contents for ZXG10-BTS
Page 4: ...This page is intentionally blank ...
Page 8: ...Figures 121 Tables 123 ...
Page 9: ...This page is intentionally blank ...
Page 10: ......
