ZXHN H1600 Maintenance Management Guide
Parameter
Description
Static: You need to specify a static IP address for the device.
IPoA: It is valid only if the WAN Type parameter is set to
DSL.
CLIP: Classical IP over ATM, IP packets to be transferred
over ATM mode through packet encapsulation.
IP Address
IP Address of ZXHN H1600.
Subnet Mask
Subnet mask of ZXHN H1600.
Gateway
It is usually the IP address of the ZXHN H1600 by default.
DNS1-DNS3
IP address of the DNS server for static connections. You can set
up to three IP addresses for the server. These IP addresses are
provided by the ISP.
IPv6
IPv6 Info Acquire Mode
Specifies how to acquire IPv6 information for the WAN connec-
tion. It is valid only if the WAN connection supports IPv6.
The options are:
Manual :You need to set the global address, gateway, and
DNS acquisition modes.
Auto: The global address, gateway, and DNS acquisition
modes are automatically configured.
Request PD
By default, the On button is selected.
Unnumbered Mode
By default, the On button is not selected. If it is selected,
Specifies how to acquire the global IPv6 address.
GUA Allowed From
Specifies how to acquire the global IPv6 address. It is valid on-
ly when the IPv6 Info Get Mode parameter is set to be Manual
Mode. Options:
DHCPv6: The device acquires a global address through
DHCPv6. If no option is selected, it indicates that no address
acquisition mode is configured.
PD: You need to set a static IPv6 address.
SLAAC: The device generates a global address in accor-
dance with the RA packets from the upper-layer server.
GUA
Mode of obtaining global address.
PD
Prefix Delegation.
Gateway
It is usually the IPv6 address of the ZXHN H1600 device by de-
fault.
5-8
SJ-20200218145027-006 | 2021-03-04(R1.0)