background image

ZXHN H1600 Maintenance Management Guide

Table 6-9 Parameter Descriptions for the Static Prefix

Parameter

Description

Name

The name of the prefix.

Prefix

IPv6 address and prefix length. Only a GUA prefix is supported.
Prefix length: 64.

3. Click 

Apply

 button to apply the changes.

Configure the DHCPv6 Server

1. Click 

DHCPv6 Server

 to the configuration page, see 

Figure 6-14

.

Figure 6-14 DHCPv6 Server Page

2. Configure the DHCPv6 server parameters.

Table 6-10

 lists the DHCPv6 server parameters.

Table 6-10 Parameter Descriptions for the DHCPv6 Server

Parameter

Description

DHCPv6 Server

Select 

On

 to let the device work as a DHCP server and assign

IP addresses to the client PCs or wireless devices.

DNS Delegate Type

DNS Delegate Type:

Auto: One DNS selected automatically from all the available
DNS will be delegated.

Manual: One or more DNSs selected manually from all the
DNSs configured before will be delegated.

DNS Refresh Time

The time during which the client PCs use the IP addresses as-
signed by the DHCP server.
After the lease time expires, the private IP address will be avail-
able for assigning to other network devices.

Prefix Delegate Type

Option:

Auto: One prefix selected automatically from all the available
prefixes will be delegated.

6-12

SJ-20200218145027-006 | 2021-03-04(R1.0)

Summary of Contents for ZXHN H1600














































































































Reviews: