ZXHN H1600 Maintenance Management Guide
Figure 6-27 Domain name
2. Type the domain name in the text box.
3. Click
Apply
button to apply the changes.
Configure the host name
1. Click
Host name
to open the
Host Name
page, see
.
Figure 6-28 Host Name
2. Type the host name in the
Host Name
text box and the IP address in the
IP Ad-
dress
text box.
3. Click
Apply
button to apply the changes.
6.10 Configure the Device Role
The section describes how to configure the device role in the mesh network.
Controller: set the device as the main control AP in the mesh network and connects
the LAN interface of the optical cat.
Agent: set the device as subordinate AP in the mesh network to connect the WAN in-
terface of the main control AP.
Steps
1. On the main page of the ZXHN H1600, select
Local Network > NetSphere
to the
NetSphere
page, see
.
6-24
SJ-20200218145027-006 | 2021-03-04(R1.0)
