4 Configure the Internet
SJ-20200714160642-002 | 2020-07-27(R1.0)
4-9
Parameter
Description
DNS1
–DNS3
IPv6 address of the DNS server for static connections. You
can set up to three IPv6 addresses for the server. These IPv6
addresses are provided by the ISP.
VLAN
Specifies whether to carry a VLAN tag in the packets sent over
the WAN connection. By default,
On
button is not selected. If it
is selected, a VLAN tag is carried in the packets sent over the
WAN connection, and the VLAN ID must be set.
VLAN ID
Identifies a VLAN. Range: 0
–4094. To ensure normal service
operation, the
VLAN ID
must be the same as that set in upper-
layer MDU/DSLAM configuration.
Note
In the ZXHN H2640 provisioning, configure only one Internet-WAN connection and
delete other WAN connections.
2. Click
Apply
button to apply the changes.
Configuring the DSL Modulation Parameters
3. On the main page of the ZXHN H2640, select
Internet > WAN > DSL
to the
DSL
Modulation Parameters
page, see
Summary of Contents for ZXHN H2640
