ZXHN H267N Maintenance Management Guide
Parameter
Description
Start
Address
The start
address of the
address pool.
End
Address
The end
address of the
address pool.
Gateway
It is usually the
address of the ZXHN H267N device
by default.
Assign IspDNS
Select
On
to let the Assign IspDNS work.
Primary
addresses of the
server1, provided by the
Secondary
addresses of the
server2, provided by the
Lease Time Mode
The mode of Lease Time.
Custom Lease Time
The time during which the client PCs use the
addresses
assigned by the
server.
After the lease time expires, the private
address will be
available for assigning to other network devices.
6.
Click
Apply
button to apply the changes.
Port Control-DHCP
7.
Click
Port Control-DHCP
.
The page is shown in
.
Figure 4-10 Port Control-DHCP(IPv4) Page
8.
Select the
interface or
on which you want to disable the
function.
4-10
SJ-20140702105807-002|2014-11-13 (R1.0)
ZTE Proprietary and Confidential
