ZXHN H267N Maintenance Management Guide
9.
Select the
interface or
on which you want to disable or enable the
and
function.
Note:
l
Click
All On
to select all
Service-Port Control types.
l
Click
All Off
to cancel all
Service-Port Control types.
RA service.
10. Click
RA Service
.
The page is shown in
.
Figure 4-16 RA Service Page
11. Configure the
Service parameters.
lists the
Service parameters.
Table 4-10 Parameter Descriptions for the RA Service
Parameter
Description
Min Retry Interva
Minimum retry interva.
Max Retry Interva
Maximum retry interva.
M
Managed flag.
Select this check box to enable the connected devices to
obtain the
address through
.
O
Other configure flag.
Select this check box to enable the connected devices to
obtain
address through
.
4-14
SJ-20140702105807-002|2014-11-13 (R1.0)
ZTE Proprietary and Confidential
