ZXHN H268A Maintenance Management Manual(EXETEL)
Table 4-6 DMZ Parameters
Parameter
Description
DMZ
Enable or disable the DMZ host function.
LAN Host
The IPv4 address/MAC address of the computer or wireless
devices at the LAN side.
2.
Click
Apply
button to apply the changes.
– End of Steps –
4.3.5 Configure the Port Forwarding
This procedure introduces how to configure Port Forwarding so that a computer from
the external network can access the LAN-side server through the WAN connection. Port
Forwarding provides the parameters of Port Forwarding configuration features.
If you have local servers for different services and you want to make them publicly
accessible, you need to specify the port forwarding policy. With
applied, it translates
the internal IP addresses of these servers to a single IP address that is unique on the
Internet.
to open the Internet users, all virtual servers on your LAN have the same IP address. This
IP Address is allocated by your
. This address should be static, rather than dynamic, to
make it easier for Internet users to connect to your servers. However, you can use dynamic
feature to allow users to connect to your virtual servers by using a
, instead of
an IP address.
Steps
1.
On the main page of the ZXHN H268A, select
Internet > Security > Port Forwarding
to open the
Port Forwarding
page, as shown in
.
Figure 4-10 Port Forwarding
4-16
SJ-20150916162339-007|2017-02-16 (R1.0)
ZTE Proprietary and Confidential
