1. Reduce the number of walls and ceilings between the ZXHN H268N and
other network devices.
Each wall or ceiling reduces the wireless network scope by 1 to 30 meters.
Properly place the ZXHN H268N to reduce the number of walls and ceilings.
2. Comply with the straight line principle between network devices.
At 45 degree angle, a wall with the thickness being half a meter is as thick
as one meter. To receive more signals, devices need to be placed to enable
the signals to be transmitted directly through walls or ceilings.
3. The wireless network scope is also affected by building materials.
The scope is affected by solid metal doors or aluminum studs. Try to place
accessing points, wireless routers, and computers, and then signals can be
transmitted through dry walls or open channels, for example, FRP products,
metal products, insulated walls, filing cabinet, bricks, and concrete weaken
the wireless signals.
4. Make sure that the ZXHN H268N with the WiFi function keeps far away from
the following devices:
Keep at least two meters far away from electrical devices or components
that generate RF noise. Signals are greatly weakened or even completely
disappeared by a 2.4GHz wireless mobile or X-10, for example, a microwave
oven, home security system, blue tooth device, or icebox.
Note:
Even through the 2.4GHz wireless mobile is not used, the signals generated
by the fixed phone also interfere with the wireless network.
4
Troubleshooting
�
All indicators are Off when the ZXHN H268N equipment is powered On.
First make sure that you have inserted the power adapter of the ZXHN
H268N into a working power socket and that the ZXHN H268N has been
powered On (the switch button is pressed down). If the indicators are still
Off after confirmation of the above items, may be the hardware is damaged.
You may contact local operator for maintenance. Never dismantle the equip-
ment by yourself.
