ZXHN H3601 Maintenance Management Guide
Parameter
Description
Click Off to disable the function.
Name
Name of the Service Control item.
The name must be specified.
Target
Specify to discard or permit the data packages.
Ingress
Specify the data stream inbound direction, and this parameter must
be specified.
If the Ingress is WAN_All, all the WAN connection can access
ZXHN H3601.
If the Ingress is LAN, the LAN side can access ZXHN H3601.
Prefix
IPv6 address prefix.
Service Type
Type Specify the service that is permitted or denied to access.
3. Click
Apply
button to apply the changes.
Remote Service Port Control-IPv4
1. Click
Remote Service Port Control - IPv4
to open
Remote Service Port Control -
IPv4
page, see
.
Figure 5-18 Remote Service Port Control - IPv4 Page
2. Configure the remote service port control - IPv4 parameters.
lists the remote service port control - IPv4 parameters.
Table 5-12 Parameter Descriptions for the Remote Service Port Control - IPv4
Parameter
Description
HTTP
The remote service port control of HTTP.
FTP
The remote service port control of FTP.
TELNET
The remote service port control of TELNET.
HTTPS
The remote service port control of HTTPS.
5-18
SJ-20200429083356-004 | 2020-07-23(R1.0)
Summary of Contents for ZXHN H3601
