5 Configure the Internet
Parameter
Description
types and distinguish service priorities.The value range of
DSCP is 0~63 and each DSCP code value is mapped to a
defined PHB (Per-Hop-Behavior) code.
3. Click
Apply
button to apply the changes.
5.8 Configure the Port Binding
The section describes how to configure Port Binding.
Port Binding
provides the
parameters of Port Binding configuration features.
Steps
1. On the main page of the ZXHN H3601, select
Internet > Port Binding
to the
Port
Binding
Figure 5-25 Port Binding Configuration Page
2. Click
Refresh
button to get the information.
5.9 Configure the Mulitcast
5.9.1 Configure the IGMP
The section describes how to configure
IGMP
.
IGMP
provides the parameters of IGMP
configuration features.
Steps
1. On the main page of the ZXHN H3601, select
Internet > Multicast > IGMP
to the
IGMP
SJ-20200429083356-004 | 2020-07-23(R1.0)
5-25
Summary of Contents for ZXHN H3601
