ZXR10 8900 Series User Manual (Basic Configuration Volume)
Command
Function
ZXR10(config)#
shaping-profile
<
profile-name
>[
level
<
2-4
>]
This creates or enters a traffic
shaping policy
Instructions:
�
Users enter traffic shaping policy view after inputting this
command. If the policy does not exist, users should input
level
to create a policy.
�
Each level has a default shaping. They are default2 , de-
fault3 and default 4..
�
By default, level 2 can be configured up to 254 policies,
level 3 can be configured up to 15 policies and level 4 can
be configured up to 31 policies.
To delete a WRED policy, use
no shaping-profile
<
profile-na
me
> command.
In global configuration mode, if a view is used, this view can
not be deleted. Default1, default2 and default3 can not be
deleted.
2. To configure discarding parameters of traffic shaping policy,
use the following command.
Command
Function
ZXR10(config-shaping)#
cir
<
1-10000000
>
cbs
<
1024-1671
1680
>
pir
<
1-10000000
>
pbs
<
1024-16711680
>
This configures discarding
parameters of traffic shaping
policy.
By default, the value of CIR and PIR is 1.
Configuring HQoS Policy
To configure HQoS policy, perform the following steps.
1. To enter policy view, use the following command.
Command
Function
ZXR10(config)#
qos-policy
<
policy-name
>[
level
<
1-3
>
mode
{
TUNNEL
|
VLAN
}]
This enters policy view
If the policy does not exist, users should input
level
to create
a policy. The policy name is within 32 characters.
To delete a policy, use
no qos-policy
<
policy-name
> com-
mand.
2. To configure policy description, use the following command.
106
Confidential and Proprietary Information of ZTE CORPORATION
