ZXR10 T8000 Hardware Installation Guide (Cluster)
No.
Check Items
Checking Method
5
Cables at bends should not be pulled too tight
On-site check
6
Whether the routed cables are straight and even. No cable crossover
exists in the cabinet. Cables outside the cabinet are banded
On-site check
7
Labels at both ends of the signal cable should be clear. The labels
should be toward the same direction
On-site check
8
Check the cables with bolts. The bolts should be fastened tight
On-site check
5.2 Equipment Power-On
Turn the switches on the power supply module and the power distribution box to the ON
position. The switches should be turned on in the following order: user power panel;
followed by equipment rack power distribution box; finally equipment power supply module.
5.3 Check After Equipment Power-On
After equipment power-on, perform the check by the items described in
Table 5-4
.
Table 5-4 Check List After Equipment Power-On
No.
Check Items
Checking Method
1
After equipment power-on, sound of the rotating fan should be heard.
There should be air out from the ventilation hole
On-site check and listening
2
Whether the power module indicators are working properly. If the
power module is in normal operation, the green indicator (RUN) should
be always on; and the red indicator (ALM) is always off
On-site check
3
Whether the fan module indicators are working properly. If the fan
module is in normal operation, the green indicator (RUN) should be
always on; and the red indicator (ALM) is always off
On-site check
4
Whether board indicators are working properly. If the board is in
normal operation, the green indicator (RUN) should be always on; and
the red indicator (ALM) is always off
On-site check
5.4 Equipment Power-Off
Turn the switches on the power supply module and the power distribution box to the OFF
position. The switches should be turned off in the following order: user power panel;
followed by equipment rack power distribution box; finally equipment power supply module.
5-4
SJ-20110901170352-005|2011-10-15 (R2.0)
ZTE Proprietary and Confidential
