ZXSDR BS8802 C100 User Guide
It supports 110 V and 220 V AC power supply. It only needs the AC socket, and does
not need additional power system. It can be installed inside the buildings of large and
middle cities. It needs no batteries as slave power.
l
GPS (or RGPS) distributed installation
For a building with several ZXSDR BS8802 C100 devices, only one
/RGPS needs
to be installed. Adopt the power splitter or one ZXSDR BS8802 C100 device as main
server, which then distributes clock to other ZXSDR BS8802 C100 devices. It is simple
in installation and saves GPS\RGPS, feeder cable, and costs.
l
Low-cost IP transmission
It adopts Ethernet for transmission, and can access multiple access devices such
as ADSL, Cable Modem, switch, xPON, and satellite transmission. It abandons
expensive E1/T1 and optic fiber transmission, greatly saving the investment cost on
transmission.
l
Large capacity
It supports 1x and DO services simultaneously, and can evolve to EV-DO Rev.B
through software upgrade.
l
Environment protection
It has small transmission power and low power consumption, thus saving the electricity
fee. It satisfies the RoSH requirements.
l
Easy maintenance and operation
It supports remote or local maintenance. The maintenance personnel can upgrade
the software via U disk, and can make troubleshooting through the indicator light on
the panel.
As for the indoor coverage, ZXSDR BS8802 C100 has many advantages and can
complement the existing indoor coverage solutions. It can help operators to raise indoor
coverage quality and enhance market competitive force on the foundation of low-cost
networking.
1.6 External Interfaces
The external interfaces of ZXSDR BS8802 C100 are located on the rear panel. The layout
is as shown in
Figure 1-3 External Interfaces
shows a description of the ZXSDR BS8802 C100 external interfaces.
1-6
SJ-20110329145303-001|2011–10–25 (R1.1)
ZTE Proprietary and Confidential
