Chapter 6 Hardware Installation
Steps
1.
Put the power adapter bracket of the ZXSDR BS8802 C100 on the wall and mark the
installation holes according to the size of the power adapter bracket.
2.
Use a percussive drill to drill Φ6X40mm holes in the marked installation positions, and
insert the expansion bolts delivered with the ZXSDR BS8802 C100 into the holes.
3.
Fix the power adapter bracket on the wall with fixing screws according to the positions
of the installation holes.
4.
Make sure that the
UP
on the installing bracket faces upward, and insert the installing
bracket into the power adapter bracket, and use two screws to fix the installing bracket,
as shown in
Figure 6-7 Inserting the Installing Bracket
1.
Fixing screws
2.
Installing bracket
3.
Power adapter bracket
5.
Insert the four hooks at the back of the ZXSDR BS8802 C100 into the four slots of the
installing bracket, as shown in
6-11
SJ-20110329145303-001|2011–10–25 (R1.1)
ZTE Proprietary and Confidential
