ZXV10 H11X (V1.0)Home Gateway User’s Manual
78
Confidential and Proprietary Information of ZTE CORPORATION
Corresponding to the established WAN connection
WAN Port Range
Destination port range of the WAN side
LAN IP Address
IP address of the LAN side
LAN Port
Corresponding port of the LAN side
For example, you can configure a port forwarding entry with PPPOE
used as the WAN connection, the destination port range of the WAN
side being 2030 to 2050, the host IP address of the LAN being
192.168.1.2 and the port number being 23. In this way, the host of
the WAN can redirect to the Telnet service of the host of the LAN
whose IP address is 192.168.1.2 by accessing a port whose port
number ranges from 2030 to 2050.
On the
Port Forwarding
page, you can enable the default
configuration, set the host IP address of the LAN and specify the
network-side interface so as to redirect access requests of the ports
at the WAN side to a specified LAN host.
Click
Edit
to edit the default number, enable Port Forwarding,
specify the WAN connection to pppoe and set the IP address to of
LAN host.
Port Trigger
The port trigger function enables the PC in LAN to open the specific
port number of this device, so the application server on Internet can
access the server in LAN through the specific opened port. Click the
Port Trigger link on the left part of the WEB page to enter the
Port
Trigger
page, which includes some default port information of
Port
Trigger
. This function can configure up to 100 Port Trigger entries
and validate up to Port Trigger entries at the same time.
