and pressing the ‘SwitchSCR’ soft-key once.
LCD
Contrast
Set LCD contrast. Range from 0 to 20.
Time
Display
Format
LCD time display in 12 hour or 24 hour format.
Disable in-
call DTMF
display
Default is “No”. This field is used to hide the keypad input
during a call.
HEADSET
Key Mode
Default Mode:
- Toggle to Headset when using Speaker/Handset
- Dial, pick up call or hang up call using Headset
Toggle Headset/Speaker:
- toggle between using Headset and using Speaker
Headset TX
gain (dB)
Set headset TX gain to -6, 0 or +6. Default is 0 db.
Headset RX
gain (dB)
Set headset RX gain to -6, 0 or +6. Default is 0 db.
Table 15: Device Configuration – Settings /Advanced Settings
Admin
Password
Administrator password. Only the administrator can access the
“Advanced Settings” and “Account Settings” page. Password
field is purposely blank for security reasons after clicking
update and saved. The maximum password length is 25
characters.
Layer 3
QoS
This field defines the layer 3 QoS parameter. It is the value
used for IP Precedence or Diff-Serv or MPLS. Default value is
12.
