date/time.
Allow
DHCP
Option 42
to override
NTP server
Default is “Yes”. This allows device gets provisioned for DHCP
Option 42 from the server automatically.
SSL
Certificate
This defines the SSL certificate needed to access certain
websites.
SSL Private
Key
This defines the SSL Private key.
SSL Private
Key
Password
This defines the SSL private key password.
Distinctive
Ring Tone
Caller ID must be configured. Select a Distinctive Ring Tone 1
through 3 for a particular Caller ID. The ZXV10 P802L will
ONLY use selected ring tones for particular Caller IDs. For all
other calls, the ZXV10 P802L will use System Ring Tone. When
selected and no Caller ID is configured, the selected ring tone
will be used for all incoming calls.
System
Ring Tone
System ring tone. Default is North American standard.
Adjust system ring tone frequencies and cadences based on
local telecom standard.
Call
Progress
Tones
Using these settings, users can configure ring or tone
frequencies based on parameters from local telecom. By
default, they are set to North American standard.
Frequencies should be configured with known values to avoid
uncomfortable high pitch sounds.
Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing (“On time” in ‘ms’) while OFF is the
period of silence. In order to set a continuous ring, OFF should
be zero. Otherwise it will ring ON ms and a pause of OFF ms