ZXV10 W615 User Manual
Confidential and Proprietary Information of ZTE CORPORATION 53
Notes:
If the Permit mode is selected, the MAC address of the local computer
must be entered to ensure network connection.
3. Click
Add
.
—END
OF
STEPS—
Checking
the
Service
List
The service list shows the enabled service ports.
Steps
1. Select
Security > Service List
. The following page is displayed.
Notes:
In the lists of services and ports, Enable is
0
: indicates
Stop
;Enable
is
1
: indicates
Start
.
Under normal condition, List of Service Connection recorded Client
IP Address and AP device IP Address after log on HTTP.
2. Check the detailed information about the service ports and connections.
—END
OF
STEPS—
Setting
Service
Control
(Fat
AP)
This section describes how to prevent specified IP addresses from accessing
the network.
