Name
Function
Description
LAN1–LAN4
Ethernet
ports
Connects to PC’s network adapter or other network
device via RJ-45 cable.
DSL
DSL socket
Connects to ADSL cable or splitter via RJ-11
telephone line.
l
Sockets and buttons on the side panel of H108L
Socket and buttons on the side panel of H108L are as follows:
The description of sockets and buttons on the side panel of H108L is as follows:
Name
Function
Description
On/Off
Power switch
Switches on or off power supply.
WLAN
WLAN RF switch
keep pressing the button for more than 5 seconds
to switche on or off WLAN RF.
WPS
WPS access
switch
Switches on or off WPS access.
USB1/USB2
USB port
Connects USB storage devices.
Notes:
The quantity of USB ports ranges from 0 to 2 depending on the actual product
model.
3
3
3
Installation
Installation
Installation
3.1
Installing
Installing
Installing Device
Device
Device
Appropriate space for heat dissipation is required to prevent the device from overheating. Do
not place the device close to heat sources or under direct sunlight. Do not block the heat dis-
sipation opening.
1.
Placement: Place the device at a place where its surface is plane and where there will be
less obstacles when communicating with the wireless terminals to ensure the best signal
strength. It is recommended to use wireless terminals in the room where H108L is placed
or the immediate room.
2.
H108L adopts the ADSL uplink mode to get connected to the Internet. It is recommended
to connect the device as the approach shown in the following figure.
5
