5
Throttle Range Calibration
1. Turn on the transmitter, then connect ESC with the battery packs and set the direction of the
throttle channel to REV; set the EPA/ATV value of the throttle channel to 100%.
2. Press and hold the “Set” button and switch on the ESC, release the button when the Blue LED
turn solid. Pull the throttle trigger to full position, Red LED light will flashes and motor beeps
once. when system confirms the position.
3. Push the throttle trigger to full Brake position, Blue LED light will flashes and motor beeps
twice when system confirms the position.
4. Now trigger goes back to neutral position, both of the Red LED and Blue LED blink and
motor beeps three times when system confirms the position.
5. Turn off the ESC power switch to save the settings.
6. Turn the ESC back on. You are ready to use the ESC now.
Programmable Item and Default Settings
Programmable
Items
Cut-off Voltage
2.6V/cell
2.8V/cell
3.0V/cell
3.2V/cell
3.4V/cell NO-cut off
1
2
3
4
5
6
7
8
9
Programmable Value
