13
Seite
Seite
Page
1 Operation
1.2.2 Copy/Change program
■
Select the program to be copied using the + / -
keys or the dialer and confirm with the green
"Enter" key.
■
You now return to the brand page.
■
Select the brand and confirm by pressing the
green "Enter" key.
■
Select the place to which the program is to be
copied using the +/- keys or the dialer. Fix the
program to its new position by pressing the
green “Enter” key.
Note:
If a program is copied or moved to an occupied
position, the existing program will be replaced.
■
You may now change the name and program
parameters, as described (see 1.2)
■
Press the red "ESC" key to return to the input mode.
1.2.3 Move program
■
Select the program to be moved using the + / -
keys or the dialer and press the green "Enter" key.
■
You now return to the brand page.
■
Select the brand to which the program is to be
moved using the + / -keys or the dialer and
press the green “Enter” key.
■
Select the place to which the program is to be
moved using the + / -keys or the dialer and
press the green “Enter” key.
■
Note: if programs are not moved or copied to an
empty position, the existing program will be
replaced.
■
Press the red "ESC" key to return to the input mode
1.2.4 Erase program
■
Within a program group, select the program to
be deleted by using the dialer or the + / -keys,
and confirm by pressing the green "Enter" key.
■
The program is displayed with all its parameters
together with the question: “Delete program”?
■
Confirm the deletion by pressing the “Yes” key.
■
Now press the red "Esc" key to return to the
input mode.
1.2.5 Look at program
■
Within a program group (brand) select a program
using the dialer or the + / -keys and confirm by
pressing the green "Enter"key.
■
The individual parameters are shown on the dis-
play, but cannot be changed.
■
Press the "OK" key to return to the “Look at” mode.
Page