38 / 61
Identification: MD-AL-GI-00
Rev. 4.0 of 31.01.18 - Application: GID
Manual of 07/06/2019 Rev. 2.1 “User Manual for 1.1K-3K TL”
6.2.
Main interface
The main LCD interface is used to display the statuses of the inverter, information, configuration of
parameters, etc.
Figure 43 – Main interface of the LCD display
The LCD screen displays the power output of the inverter, the input information coming from the PV system,
information relating to errors, etc.
Figure 44 – Indicators in the main interface
A1 – Modbus communication address
A2 – RS485 Communication
A3 – Steady light for active RS485 communication
A4 – Wi-Fi Communication
A5 – Flashing light to indicate over-frequency and power derating status. Steady light to indicate remote
control
A6 – Indicates the energy produced today
A7 – Indicates the energy produced in total
A8 – Steady light to indicate the high temperature of the inverter
A9 – Output power in real time
A10 –Functioning of the MPPT SCAN option.
A11 – Steady light when the input voltage is higher than 100V
A12 –Real-time input voltage value
A13 – Input voltage and current of the string
A14 – Light is on when the state is normal
A15 – Grid voltage