9 / 61
Identification: MD-AL-GI-00
Rev. 4.0 of 31.01.18 - Application: GID
Manual of 07/06/2019 Rev. 2.1 “User Manual for 1.1K-3K TL”
1.2.
Symbols and icons
Safety signals
Pay attention to possible burns due to hot parts.
Only touch the screen or press the keys while the inverter is in
operation.
Caution
The PV strings should be connected to the ground in accordance
with the local regulations.
•
To ensure the safety of the system and people, the inverter
and photovoltaic strings must be securely connected to
the ground.
Attention
Ensure the correct DC input voltage; this must be below the
maximum allowable DC voltage. Overvoltage can cause
permanent damage to the inverter that is not covered by the
warranty!
Warning
Symbols on the inverter
Some safety symbols are located on the inverter. Read and understand the contents of the
symbols before installing the inverter.
Residual voltage may be present on the inverter! Before opening the
inverter, wait 5 minutes to ensure that the capacitors are completely
discharged.
Be careful of high voltage
Be careful of high temperatures
Complies with the European Standards (CE)
Grounding point