45
Minipool
En
- MaInTEnancE
CoLD ExTERNAL
ENVIRoNMENTS
With temperatures
below +10° C
at night
when the system is not used, cover the
minipool with a special canvas provided as
optional.
If the minipool is mainly
used with external
temperatures below
+10° C, we recommend you connect an
exchanger.
WINTER INACTIVITY IN
CoLD CLIMATES
In areas where winter temperatures drop
frequently below freezing temperature
,
carry out the following during the period
when the whirlpool is not in use:
1) - Disconnect the main electrical panel.
2) - Empty the minipool.
CAUTIoN:
1) - Eliminate stagnant water on the seats
and on the bottom of the tub with a
sponge,
2) - Remove the residues from the water
circuit: they can be vacuumed with
a vacuum device or swept away by
blowing compressed air through the
hydromassage and intakes nozzles.
3) - Remove and clean the filter cartridges
(see the illustrated steps in the
following pages) and store them in a
dry environment.
4) - Cover the minipool to keep it clean.
5) - Before using the minipool again, refer to
the pages of this manual once again.
WINTER INACTIVITY IN
WARM CLIMATES
In hot environments, where the temperature
drops only
occasionally below zero
, the
minipool may be left full of water, as long as
it is provided with a frost protection.
Do not disconnect the electrical supply; we
recommend setting the
minimum heating
temperature (15° C
).
0°C
CLEANING THE “DUCT”
(freestanding version)
To access the “duct” in the “freestanding”
version, it is necessary to lift the whirlpool
cover and place it on the revolving supports.
3 people are required for this task.
1 Grab the inner edge of the cover and
positioning yourself near the feet with
the revolving supports (see figure).
2 Lift the cover.
3 Turn the revolving supports outward with
your foot.
4 Place the cover on the supports.
5 Cleaning the “duct”.
x3
1
2
