217
EN
217
IT
BLOCCO DI MODALITÀ
: si può fare in modo che la macchina funzioni unicamente in
modalità Automatica, Professionale e anche che non sia possibile cambiare il numero
di arance o il volume da spremere affinché si sprema solamente la quantità stabilità.
MODALITÀ MANUALE (Modalità di aiuto)
: Nei modelli di macchina dotati di un
azionatore o un sensore di funzionamento ausiliare, è possibile annullare selezionando
la modalità
MANUALE
[Modello Self Service: Rubinetto SS Up (44U). Modello Tank e Cooler:
Sensore di livello (56)].
SISTEMA PULPOUT:
Puoi attivare il Sistema PulpOut per l’eliminazione automatica della
polpa e dei semi. Puoi scegliere tra la modalità d’uso continua o discontinua.
La
modalità continua
elimina la polpa durante tutto il tempo della spremuta. Allunga
l’autonomia del sistema, e di conseguenza, il tempo d’uso prima di doverla pulire.
La
modalità discontinua
permette un tempo di filtrazione della polpa più esteso.
Si può scegliere la frequenza con cui il sistema si attiva, a seconda del tipo di agrumi
utilizzati e la quantità di polpa. Una frequenza rapida attiverà il sistema in intervalli
temporali minori.
In questo modo, il nastro si attiverà a seconda del programma scelto, dopo i seguenti cicli
di spremitura:
È inoltre possibile attivare la funzione “Pulizia automatica”, che consente al nastro di pulirsi
automaticamente dopo l’ultimo spremuta. In modalità discontinua, la funzione “Pulizia
automatica” si attiva 30 secondi dopo l’ultima spremuta.
REGULAR
SLOW
FAST
10 arance
15 arance
20 arance
Speed Pro Cooler: Unidad rifrigerante
Accendere il sistema refrigerante azionando l’interruttore che si trova alla sinistra dell’uscita di
succo del serbatoio. È possibile regolare la temperatura del succo tramite il regolatore situato
a destra, girandolo in senso orario per abbassare la temperatura e
in senso antiorario per
aumentarla.
Azionare la leva del serbatoio per riempire un bicchiere o una caraffa.
Importante!
Ricorda di spegnere il (70) Sistema refrigerante quando spegni la macchina
principale, per evitare consumi inutili.
Configurazione
La macchina spremiagrumi Zumex
Speed
permette di regolare i parametri secondo le proprie
preferenze.
Si può scegliere e programmare la modalità di funzionamento della macchina utilizzando il
dispositivo elettronico. Con questo, sarà possibile controllare attributi e funzioni seguendo i
MENÙ
allegati.
Per entrare nel
MENÙ
è necessario premere i tasti
STOP
e
MODE
per almeno 2” e inserire il PIN di
default (0000). Quindi premere il tasto
OK
almeno 2 secondi per confermare il PIN.
Una volta all’interno si può configurazione:
LINGUA
: Puoi selezionare una delle 23 lingue disponibili.
PIN
: Vedere o cambiare il PIN attuale in modo che nessuno possa modificare i parametri
della macchina.
CONTATORE
: Vedere il contatore totale o parziale della macchina. Azzerare il contatore
parziale visibile sulla schermata principale. Per azzerare il contatore della macchina,
premere i tasti
STOP+START
per 3” fino a quando il contatore è a 0000000.
CREDITO
e la macchina si bloccherà quando raggiunga il credito prefissato fino a
quando si programmi di nuevo la quantità.
Summary of Contents for Speed Pro
