011302/01
2
•
Extract the front of the machine (Fig. 2b).
•
Extract the rear (Fig. 2c)
•
Disconnect the wires from the switch and the mains power supply (Fig. 2d)
except the mains supply bridge (Fig. 2e)
•
Extract the electronic circuit board (2.5mm Allen key) (Fig. 2f)
2a
2b
2c
2d
2e
2f
3.- REPLACING THE ELECTRONIC CIRCUIT BOARD.
•
Mark the wires in pairs before dismantling (Figs. 3a and 3b)
•
Do not dismantle the board further. Send it to be repaired as it is. (Figs. 3c and
3d)
3a
3b
3c
3d