011319-03
6
Technical instructions
Z22
2.6.
After removing the drive disc, we have to remove the rubber cover below the bowl. We have
to stretch from the slot that we have on the side; then we have to stretch slowly for avoid that
we break the cover.
(
Be extremely careful when removing the rubber cover and don’t
force it to much for remove it faster,
it’s better that you do it slowly)
2.7.
Once the rubber cover is out, we will see 4 Allen bolts that fix the motor to the motor housing.
Be extremely careful, because when loosening the 4 bolts the motor remains free and
it can fall down.
When we have the bolts removed, we can proceed to pull the motor out from
the other side; bearing in mind that we have cables on the other side that can be damaged.
Once we have done all these operations we will have
the motor free and we can proceed to change it in
case of breakdown.
