Zurn Industries, LLC | Specification Drainage Operation
1801 Pittsburgh Avenue, Erie, PA 16502, Ph. 855.663.9876
In Canada | Zurn Industries Limited
7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, Ph. 877.892.5216
www.zurn.com
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
ADVERTENCIA:
Cáncer y daño reproductivo - www.P65Warnings.ca.gov
AVERTISSEMENT:
Cancer et effets néfastes sur la reproduction -
www.P65Warnings.ca.gov
Rev. -
Date: 4/03/2020
C.N. No. 142533
Prod. | Dwg. No. C66 Page 3 OF 3
Z1231EZ
WALL-HUNG LAVATORY ADJUSTABLE CARRIER INSTALLATION INSTRUCTIONS
10.
Gently slide lavatory onto the carrier arms to
1/16” of the finished wall. The access holes on
the underside of the lavatory should line up with
the lockdown bar & adjustment screw holes of
the arms. See Fig. 10
11.
To adjust the height and level of the lavatory,
adjust the (4) 1/8” hex head leveling screws up
through the underside of the lavatory access
holes, raising the fixture until level side to side
and front to back. See Fig. 11
12.
Once the lavatory is set to the proper height
and leveled, gradually reverse the lock-down bar
screw from the arm until the rubber pads of
the lock-down make contact with the fixture,
securely locking it into place. See Fig. 12
13.
Caulk/Silicone lavatory to the finished wall for a
watertight seal. See Fig. 13
Fig. 10
Fig. 11
Fig. 12
Fig. 13
