The third step
Input the public net IP address in the IE, and add the port number of the Embedded DVR you want to
access after the IP, for example: http://155.157.12.227:81. If you want to access by Client Software, you
can use the outer net TCP port directly.
Notice: for detail configuration setting, please refer to the user manual of Router.
6.3 NTP function
Enable NTP function; make the time synchronization with both the DVR and GPS clock server, to ensure
the accuracy of device time.
6.3.1 Internet configuration
Get to the
【
CONFIGURATION
】
→
【
NETWORK
】
, choose
【
Advanced
】
, and then choose
【
NTP
】
to set.
After the device can access the Internet, NTP server can use the standard NTP server as the time. For
example, the server of China’s national research center (IP address: 210.72.145.44). Input the IP address
and domain name of relative server at NTP setting.
Activate NTP, click to choose “Enable”.
The interval of changing time is from 1 to 65535 minutes.
6.3.2 Intranet Configuration
If DVR work under the intranet, users can set up a privately-owned server as clock source.NTP address in
DVR configuration fill in privately-owned NTP address can work.
Privately-owned NTP server can adopt standard NTP products and accurate time PC system. Please refer to
below instruction when adopt PC system as a NTP server.
NTP Server Set Up under Windows
“Start” menu → “Run”(or Win+R), input “regedit” to get into REGEDIT.
Build a new key assignment of DWORD Value below.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters registry sub
key;
Change the value to 1, and save.
Restart the computer.
NTP server set up under Linux system
Due to the particularity of Linux system, for detail way to erect the NTP server, please refer to every
editions of the manual.
6.4 PTZ
In live screen, right click and select
【
PTZ Control
】
on control channel, as shown in Diagram 0-3 PTZ
control.
