6.4.1 PTZ Control
From PTZ control menu, set direction step length, zoom, focus, iris, advanced features, auxiliary features,
camera settings.
PTZ control
Step size
:
Controls PTZ direction and speed, e.g. step size 8 is moved faster than step size 1. (Range 1-8,
8 is max value)
Click
and
of zoom, focus and IRIS to modify zoom, focus and brightness.
Eight direction rotations: up, down, right, left, up-left, upright, lower left, lower right.(Front panel just 4
direction)
Quick location: <SIT>in the middle of the direction arrows, make sure the protocol support this function,
only mouse control. Click any point, PTZ will turn to it and move it to the centre of screen
Mouse drag on quick location page, support 4 ~ 16 times variation, drag from top left to bottom right to
zoom in box , drag from bottom right to top left for zoom out box .
【
Preset
】
Input the wanted preset number which has been recorded. Then click the preset button to call the
function.
【
Tour
】
Input the tour number and click “tour” to run it or stop tour by “stop” button.
Preset
Click “
” to switch to the interface of preset. Direction button to Rotate the camera to the desired
position by the direction button. Then choose
and input a preset value in the preset input
box. Click [increase preset] to save. Input the desired preset value in the preset input box and click [delete
preset] button to delete.