background image

 

   

1.

 

Connect   your   video   source   (such   as   a   Blu-­‐ray   Disc   player)   to   the   transmitting   unit   
HE2IR-­‐TX.       

2.

 

Connect   the   IR   blaster   to   the   transmitting   unit   HE2IR-­‐TX,   and   make   the   IR   blaster                   
directly   point   to   the   IR   sensor   of   the   HDMI   source   device(s).       

3.

 

Connect   a   display   (such   as   a   LCD   or   plasma   HDTV)   to   the   receiving   unit   HE2IR-­‐RX.   

4.

 

Connect   the   IR   receiver   to   the   receiving   unit   HE2IR-­‐RX,   and   make   the   IR   receiver                   
directly   point   to   the   user.   

5.

 

Connect   two   Cat-­‐5/5e/6   cables   between   the   transmitting   and   receiving   units   via   

A/V   

SIGNAL

   and   

CTRL   CHANNEL

   ports   respectively.   

6.

 

Make   sure   these   two   Cat-­‐5/5e/6   cables   are   tightly   connected   and   not   loose.   

7.

 

Plug   in   5V   DC   power   supply   unit   to   the   power   jack   of   the   receiving   unit   HE2IR-­‐RX,   or   use   
USB   Power   Cable   

Model:   2USB135L   (Sold   Separately)

       

8.

 

If   you   see   flickering   or   blinking   image   on   the   display,   adjust   the   rotary   control   

Signal   Level

   

on    the    receiving    unit    to    improve    the    cable    skew.    0    stands    for    the    strongest    HDMI    signal   
level   for   longest   possible   transmission   length   while   7   stands   for   the   weakest   HDMI   signal   
level    for    short    transmission    length.    Try    adjusting    the    signal    level    from    7    to    0    to    find    the   
optimal   setting   for   the   HDMI   over   CAT5/6   transmission.   

                                   

IR   Extenders   

    IR   Blaster

   

   

   

   

   

   

   

                       

IR   Receiver

   

      

   

   

   

   

   

   

   

   

   

   

HARDWARE   INSTALLATION

   

IR   CONTROL   PATH

   

Summary of Contents for HE2IR-RX













Reviews: