18
Versión / Version 1; Ene 2017
4. ASSEMBLING:
Figure 3
Assemble the equipment according to Fig. 3:
1. Fix the lamp box (16) in the stand (15) according to the arrow direction, and tighten the
lamp box fixing screw (17).
2. Insert the connecting cable (24) separately into the lamp box (26) and the stand (15)
sockets.
3. Put the trinocular head (2) according to the arrow direction shown in fig. 3 and tighten the
head fixing screw (29).
4. Insert the eyepieces (1) into the binocular observing tubes.
5. Screw the objectives (5) into the nosepiece (4).
6. Insert the power wire to the main supply.
Note: 1) The microscope must be earthed
2) Make sure the power voltage is in accordance with the microscope’s marking voltage.
