Zakład Wytwórczy Aparatów Elektrycznych Sp. z o.o.
15
5. EXPLOITATION
5.1. Manual control
In order to manually maneuver the drive:
(1) insert the notch of the drive lever [10] into the lock handle [9]
(2) swing the lever in the direction indicated in the sketch
For version with BE-2 blockade:
(2.1) Press the lock release button
(2.2) Slide the drive shaft slide gate with your fingers
(4) put the lever on the drive shaft
(5) rotate to close the apparatus (right) or open (left) depending on the current position of the apparatus.
After completing the maneuver, lower the grip handle [9] and retract the drive lever [10].
EMERGENCY MANEUVERING
The BE-2 lock also allows the emergency
maneuvering. The flap(secured with a pad-
lock, seal, etc.) obstructing the locking coil
should be pushed back and the coil plunger
pulled back. While pulling back the plunger,
perform steps 2.2-4.
2
1
A
B
4
3
2
1
4
3
2.1
2.2
