Multi IAQ Monitor Operating Instructions
Model: ZGkb201p
1. General Introduction
Indoor Air Quality is used to measure for the quality of air in interiors; the
comfortable indoor environmental quality can make people feel fresh, work
effectively and it’s good for the health. The CO
2
concentration is the important
factor of good indoor air quality. People breath in oxygen and breath out CO
2
,
nowadays people often close the windows to avoid noise and enjoy the
comfortable living and working environment provided by air-conditioning
systems, which results in the fact that the indoor concentration of CO
2
is far
higher than the outdoor average’s. With the high CO
2
concentration and non-
proper ventilation, people will feel headaches, dull, fatigued, lose of
concentration and correspond to the high levels of dust, chemicals and
bacteria in the air.
2
.
ZGkb201p ------ Multi IAQ Monitor (CO2 / Temperature / Humidity)
ZGkb201p Multi IAQ monitor is a cost-effective, air quality indicator, the large
single digit LED display with three most critical parameters of indoor air quality,
the current CO
2
concentration, the ambient temperature and the relative
humidity.
CO
2
-----CO
2
concentration indicates the amount of fresh air ventilation being
introduced to a space.
Ambient temperature----The suitable ambient temperature brings the
comfortable space
.
Relative humidity----The relative humidity in air indicates the amount of
moisture.
Features:
Dual Beam NDIR (Non-Dispersive-Infrared) technology is being used to
measure CO
2
concentration up to 3000 ppm (parts per million)
The Large single digit LED clearly displays the CO
2
concentration,
Relative humidity and ambient temperature
The various (blue, yellow and red) colors of LED’s show the indoor air
quality situation
The Reliable CO
2
sensor provides the long-term calibration stability
Dimmer Function can automatically adjust the display of single digit LED
to reach the power saving
Benefits:
Enjoy the more comfortable, hygienic and healthier Indoor Air Quality
Save energy, get the proper ventilation, the over-ventilation of the building
can be reduced.
Improve the IAQ satisfaction in public.
Application:
ZGkb201p has the widely application for classroom, kindergarten, meeting
room, office building, shopping mall, theater, exhibition, hospital, hotel, sports
center, gymnasium, railway station, bus station, airport and other public place
where the comfortable and healthy indoor air quality is important.
3. LED Display
CO2 DISPLAY
FLASHING DOT
TEMPERATURE DISPLAY
HUMIDITY DISPLAY
LED DISPLAY
DIMMER SENSOR
PROTECTING CAP
AIR FITTING
D-SUB CONNECTOR
POWER SWITCH
POWER CONNECTOR
There are three modes: CO
2
, RH, Temperature measure mode.
CO
2
, RH, Temperature measure mode:
When CO
2
concentration is below
800ppm, the green LED will light.
When CO2 concentration is between
800ppm and 1200ppm
, the yellow
LED will light.
When CO2 concentration exceeds
1200 ppm, the red LED will light.
When CO
2
concentration exceeds
the CO
2
measurement range
(0-3,000ppm), the CO
2
display
area will display with “Hi”. It will
disappear when the CO
2
concentration returns to the
measurement range.
When RH exceeds the RH
measurement range 20%, the
humidity display area will display
with “Lo”. It will disappear when the
RH returns to the measurement
range.
When RH exceeds the RH
measurement range 90%, the
humidity display area will display
with “Hi”. It will disappear when the
RH returns to the measurement
range.
