Section 3
IP Streaming Setup
Step 5: IP Streaming
1.
Enable
the Stream by selecting the check box 1-8.
(All streams can be enabled at the same time by using the “master” checkbox)
2.
Enter
the stream Destination IP [ example: udp://224.1.1.4:1234].
3.
Set
the TTL value.
4.
Select
‘Save and Confirm’ once all the streams are setup.
Disabling IP Streams:
The HDIP-8000 offers the user a SPTS output stream. Each Stream can be disabled as required.
To disable an IP Stream
uncheck
the checkbox in front of the appropriate IP Stream_ID (1-8).
10
HDIP-8000 Manual V1.0
