Section 4: Network Configuration
Step 7:
Network Configuration
Management IP Setup:
Use the Network Setup to configure the device’s Management Port’s IP address (GUI address) of the device, Subnet Mask,
Gateway, Enable/Disable DHCP, and set Host Name.
Step 8: Save and Confirm
When setting the Subnet Mask ensure the Subnet Mask of the device and the PC have the same Subnet Mask.
Streaming IP Setup:
Step 9
:
Modify
(as required) Streaming IP address.
Select
Save and Confirm to save all changes.
*Streaming IP address is the IP address of the IP port sending out the IP Streams.
11
HDIP-8000 Manual V1.0
